.jpg)
GN-56UB8 Featuring a single die solution, low power consumption and low costs, the GN-56UB8-X are multi-GNSS (GPS BeiDou , GLONASS ,SBAS and QZSS) positioning Module developed to meet the requirements
GN-56UB8 Featuring a single die solution, low power consumption and low costs, the GN-56UB8-X are multi-GNSS (GPS BeiDou , GLONASS ,SBAS and QZSS) positioning Module developed to meet the requirements of an extensive range of applications and end-products. Based on the high performance UBX-M8030 position engine ,these receivers provide exceptional sensitivity and acquisition times and interference suppression measures enable reliable positioning even in difficult signal conditions.
1.3 Product Features ? UBX-M8030 high performance GPS/GNSS Chips: ? over 2 million effective correlators ? 72 channels in Search mode ? cold start acquisition sensitivity of - 148 dBm and - 167 dBm tracking sensitivity ? up to 10 Hz navigation update rate ? Supports GPS, QZSS, GLONASS , BeiDou and is ready for Galileo ? Supports AGPS ? Integrated TCXO,LNA,SAW,RTC ? Compact size (φ56mm x 8.90mm ) suitable for space-sensitive application ? Support standard NMEA 0183,UBX ， RTCM ? This module can be equipped with QMC5883,MCU, Barometer and so on.
| |
Product Application ? Handheld GPS receiver application ? Ideal for PDA, Pocket PC ? Geographic Surveying ? Sports and Recreation ? Marine Navigation, Fleet Management | ? Automotive application ? Car navigation and tracking ? AVL and Location-Based Services ? Timing application ? UAV |
.png)
TOPGNSS GNSS Module GN-56UB8X Performance | |
GNSS CHIP | M8030-KT |
frequency | L1, 1575.42MHz |
protocol | NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode |
Available baud rate | (Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps |
Receiving channel | 72 |
Sensitivity | Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm |
Cold start | 29s average |
Warm start time | 28s average |
Hot start time | 1s average |
Precision | HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average |
maximum height | 18000 Meter |
Maximum speed | 515 m/s |
Maximum acceleration | 4G |
update frequency | 1-10Hz(default1HZ |
A-GPS | AssistNow on-line and off-line |
Working output level | |
output level | Output TTL level |
Physical characteristics | |
PIN | 6 pin 1.25 pitch SCL,CAN/RXD CANH/TXD GND, VCC3.3-5V.SDA |
Dimensions | 30mm * 30 mm * 10.2mm |
Operating Voltage | 3.3V-5.0VDC ±5% |
weight | 8.5g |
Connector form | 1.25 6 PIN |
Cable length: | 15 CM |
Operating temperature | -40 to 85 |
Storage temperature | -40 to 85 |
The GN-56UB8 X GPS module can be selcted according to the needs of the corresponding interface
output side and additional sensors, there are mainly the following options.
NAME | TTL | CAN | QMC5883 | MS5611 | STM32F103C8T6 |
GN-56UB8-C | NC | √ | √ | NC | √ |
GN-56UB8-T | √ | NC | √ | NC | NC |
GN-56UB8-M | √ | NC | √ | NC | √ |
GN-56UB8-S | √ | NC | √ | √ | NC |
